Digital Sight 100 Ver2.3.8

1. Installation
To install this program, you need a Digital Sight 100 and a PC.
– Extract “updater-v2.3.8.zip” to a folder of your choice.
– Connect the camera to the PC with a USB cable and turn on the camera.
– Launch “DsCamUpdater”.
– Click “UPDATE”. The update will start.
Important: Do not turn off the camera until the update is complete. If the update fails, the camera may not start normally.
– When the update is complete, the message “The camera update is completed.” will be displayed. Click “OK”.
– Click “Finish” to close DsCamUpdater.
– Restart the camera for the update to take effect.

2. Modifications
– Continuous AWB mode is now supported.
– An HDMI output image-flip setting has been added.
– Microscope integration functionality has been added.

3. Notes
– Digital Sight 100 does not support USB 2.0. Connect via USB 3.2 when updating.
– Never turn off the camera or disconnect the USB cable while updating, as this may cause a malfunction.

Release date: October 30, 2026