Nikon Logo - Primary
Nikon Metrology Europe NV
Global
Nikon Logo - Primary
Jetzt anfragen

Ver2.10.00

NIS-Elements LE
Software Download Graphic

Softwaredetails

Imaging Software NIS-Elements LE Ver2.10.00
1. Conditions of Use
– This application can be used without a license.
2. Installation
    Please install this application according to the following steps.
    Flesh installation
     – Install NIS-Elements LE Ver2.10.00 by Setup.exe in the downloaded files.
    Updating from the previous version
      – Uninstall the older version of NIS-Elements
      – After the uninstall, install NIS-Elements LE Ver2.10.00 by Setup.exe in the downloaded files.
3. Supported OS
– Windows11 Pro 64bit (English/Japanese)
4. Modifications
  – The following features have been added: V2.10.00
    -New CamerasSupports
     1)DS-Fi3.
     2)Supports DS-Qi2.
     3)Supports DS-Ri2.
    -Measurements
     1)Added intensity profile feature.
       An intensity profile can be displayed over the image
    -Digital Sight 100
     1)You can now select “FN16mm (0.6x Relay)” from “Field of View.”
     2)Feature to synchronize image rotation/flip with HDMI output
       Rotation/flip settings can be synchronized with the HDMI output destination.
     3)Auto White Balance always on
       Added the ability to always run Auto White Balance during live view.
     4)When connected via Wi‑Fi, show recently used items
       You can select network settings of DS100 that you have connected to in the past from history.
       Up to the latest 6 items are kept.
     5)QR code display of network information
       You can share DS100 network information by scanning the QR code with another device.
       The QR code reading button is not shown if the device has no camera function.
     6)Scene modes refreshed. Supported scene modes are:
Standard
Industrial: Wafer/IC
Industrial: Metal
Industrial: Circuit board
Industrial: FPD
Biologocal: Research
Biological: White LED
Biological: Clinical laboratory
Asbestos
FL/Linear
    -Digital Sight 10
     1)Scene modes refreshed. Supported scene modes are:
Standard
Industrial: Wafer/IC
Industrial: Metal
Industrial: Circuit board
Industrial: FPD
Biologocal Research
Biologocal: Research HE
Biologocal: Research ELA
Biologocal: White LED
Biologocal: Clinical laboratory
Asbestos
FL/Linear
    -Microscope information display Feature
     1)You can obtain information for a specific microscope via Digital Sight 100.
       # For supported microscopes, please contact the place where you purchased our products.
       A dedicated trigger cable (S-CTC) is required.
       When connected, the following microscope information can be obtained:
• Name of the microscope body
• Objective lens information
• Transmitted light information (ON/OFF state, light intensity)
• Relay lens information
• ECO mode status
• Firmware information
• Sleep status
       When capturing while microscope collaboration is active, the microscope information is saved in info.csv upon saving.
       Automatic calibration is performed based on the objective lens information and relay lens information.
       You may still manually adjust calibration values as before.
    -Offline Mode
     1)You can display and edit images even when no camera is connected.
    -Auto-Rotate Screen Feature
     1)Detects the orientation of the tablet and rotates the screen accordingly.
       You can disable this by turning it OFF, keeping the screen orientation independent of the tablet orientation.
    -Export Feature
     1)You can export images currently being viewed.
       You can change the file format and adjust the size.
    -Barcode Scanning Feature
     1)Added barcode scanning functionality to the save destination settings screen.
       Press the barcode button to launch the camera, and the scanned content is automatically inserted as a prefix.
    -QR Code for Streaming Address
     1)When you select “Server” or “This Device” in “Stream,” the address shown in “Link” is automatically generated as a QR code.
  – The following features have been added: V2.00.00
    -New Cameras
     1)Digital Sight 100 is now supported.
     2)Digital Sight 50M is now supported.
    -License Authentication Changes
     1)License is no longer required.
       To use the main features, a supported camera must be connected.
    -Wi-Fi Connection
     1)Digital Sight 100 can now be connected via Wi-Fi.
    -Annotation Additions
     1)Circles can now be drawn.
     2)Rectangles can now be drawn.
     3)Polygons can now be drawn.
       Unlike the previous polyline, the edges are automatically closed when drawing is finalized.
    -Measurement Additions
     1)Counting is now available.
    -Graticule Feature Enhancement
     1)The line width, previously fixed at 1px, can now be set in 7 steps.
    -Scale Feature Enhancement
     1)The size of the scale bar can now be set in 11 steps.
       By turning on auto size, it can be used in the same way as NIS-L.
     2)The text size of the scale bar can now be set in 4 steps.
    -Pixel Saturation Display Feature
     1)Pixels with brightness saturation (blown out highlights) can now be highlighted.
       The highlight color can be selected from 6 colors.
    -Maintain Text Size During Zooming
     1)When zooming in or out on the displayed image,
       the text size of annotations and measurements is maintained.
 For details, please refer to the“Release Note“.
Release date: October 30, 2026

Formular zum Herunterladen der Software/Firmware

Um diese Version der Software/Firmware herunterzuladen, füllen Sie bitte das nachstehende Formular aus und senden es ab.