Digital Sight 10 Ver1.10

Software Details

Installation
To Install, use the Digital Sight 10 and PC.
– Extract “DS10_FW_v1.10.zip” to any folder.
– Connect the PC and the Digital Sight 10 via USB, and turn on the Digital Sight 10.
– Execute “DsCamUpdater.exe” in the “updater” folder.
– Click “UPDATE”. The update will start immediately.
Please wait until the update is complete. It takes about 1 minute.
– When the update is complete, the message “The camera update is completed” will be displayed. Click “OK”.
– Click “Finish” to close the updater. Please reboot the Digital Sight 10 for the update to take effect.

Modifications
– Improved the artifacts on the horizontal streaks that may occur at fixed positions when the brightness is extremely low or when the contrast is greatly emphasized with LUTS.
*Artifact: Noise / degradation artificially created on the image

Notes
– Digital Sight 10 does not support USB 2.0. Please Connect with USB 3.2.

Release date:25/05/2022