Products and promotions may differ based on your selected region.
Accessories for MM-400N and MM-800N Series
![](https://industry.nikon.com/en-us/wp-content/uploads/sites/13/2021/12/accessories_10x6-stage-500x500.png)
X/Y Manual Measuring Stages
Stages for the MM-800N from 12”x8” (300mm x 200mm) to 2”x2” (50mm x 50mm). Stages for the MM-400N from 6″x4″ (150mm x 100mm) to 2”x2” (50mm x 50mm).
![](https://industry.nikon.com/en-us/wp-content/uploads/sites/13/2022/03/rotating-table-500x500.png)
Rotating Tables for X/Y Manual Measuring Stages
Tables rotate the sample, keeping alignment with the XY axes of the stage.
![](https://industry.nikon.com/en-us/wp-content/uploads/sites/13/2022/03/remote-switch-500x500.png)
Counter Remote Switch
The counter remote switch enables remote control of the counter’s RESET and SEND.
![](https://industry.nikon.com/en-us/wp-content/uploads/sites/13/2022/03/foot-switch-500x500.png)
Foot Switch
The foot switch is used to send a load command to DP-E1A. It frees both hands to enhance measurement efficiency.
![Counter reset switch](https://industry.nikon.com/en-us/wp-content/uploads/sites/13/2023/05/7.-counter_reset_mm-500x500-1.png)
XY Reset and Switch
The XY reset and switch can be attached to the main body to reset values easily while using the stage.
![](https://industry.nikon.com/en-us/wp-content/uploads/sites/13/2022/03/calibration-scale-500x500.png)
Calibration Scale 300mm
10mm-interval and calibration patterns are provided. Accuracy: within 1 μm against compensation values.